Printing with Wireless Direct

You can connect devices (e.g. computer, smartphone, or tablet) to the printer by two methods below.

This section describes Wireless Direct, which allows you to print by connecting the devices to the printer directly.

Follow the procedure below to use Wireless Direct.

Important

You can connect up to 5 devices to the printer at the same time.
Check the usage restrictions and switch the printer to the Wireless Direct.
- Restrictions

Enabling Wireless Direct of Printer

Make sure that the printer is turned on.
Press and hold RESUME/CANCEL button and release it when Alarm lamp flashes 12 times.

Note
- To check the printer's MAC address and the current Wireless Direct settings, print out the network setting information.
  - Printing Network Settings

Turn on Wi-Fi function on your device.

Enable "Wi-Fi" on your device's "Setting" menu.

For more on turning on Wi-Fi function, see your device's instruction manual.
Select "XXXXXX-GM2000series" ("X" represents alphanumeric characters) from list displayed on your device.

Note
- If "XXXXXX-GM2000series" does not appear on the list, Wireless Direct is not enabled.
  
  See Enabling Wireless Direct of Printer to enable Wireless Direct.
Enter password.

Your device is connected to the printer.

Note
- You can check the password by printing the network settings from the printer.
  - Printing Network Settings
- Depending on the device you are using, entering the password is required to connect a device to the printer via wireless LAN. Enter the password specified for the printer.
- Depending on the security settings, you may not need to enter a password.

After connecting a device and the printer, start printing from the application of your device.

Note

For more details on printing from a device, refer to the instruction manual of the device or application.
You can print from your smartphone or tablet by installing Canon PRINT Inkjet/SELPHY. Download it from App Store and Google Play.
- For iOS
- For Android